HIGH - EFFICIENCY ROCK SAND CRYSTAL
Rock sand crystal is a natural mineral compounded by a variety of organic and inorganic materials. This
material has bleed air, thicken, plasticize and improveThe unique use of performance and other unique
effects is the only additive in the country that is not blended according to the cement mass ratio. Complete
replacement of lime, cement sand in mixed mortarSaving cement in the pulp not only ensures strength,
but also improves durability and impermeability and crack resistance. After testing by the state, it is indeed
non-toxic, non-radiative,Pollution-free green materials.
Rock sand crystal can save labor, save materials and save money:
1. Mixed mortar: 40% water saving, 10% provincial body, 5% labor increase, completely replace lime.
2. Cement mortar: save 15% of cement, save 20% of water, and increase labor efficiency by 5%.
3, non-toxic, environmentally friendly, simple construction, good results. ,
4. Prevent premature hardening of the mortar and reduce cracking of the mortar.
5. Improve the waterproof and impervious effect.
6 Enhance the bond strength of the plastering mortar.
Applicable to all kinds of industrial and civil building masonry, interior and exterior wall plastering,
tiling, floor, roof, cement hollow brick, pavement block, culvert, basement, pool, bathroom, stove
and other mixed mortar.
1, Gulang rock sand crystal has water-saving function, it is best to first enter the mixer, a car sand, pour into the rock sand crystal in the road into the sand cement and water for mixing,
This rock sand crystal can be fully blended in cement and sand to achieve the best results.
(1) The wall is smeared in front of the wall, the mortar is not too thin and not too thick. The mortar itself is solubilized.
(2) The wiper should be continuously and repeatedly carried out twice, and the interval is too long, the moisture is dried and solidified, and it is not easy to operate twice.
(3) Multi-functional rock sand crystal has early action, the brake surface time should not be too long. When the pulp is not completely eaten, it is best to use a steel trowel to press the surface floating sand.
(4) Frame structure Cement column plastering should be wiped with interface agent or sprayed with ash (or plain ash).
3, wipe the outer wall: multi-functional rock sand crystal is not easy to use too much, too many cracks, other and the same.
4. Masonry: The brick surface needs to be watered, and the masonry is full.
5, the top of the shed: before the shed, you need to wipe the interface agent or 108 glue, the wiper is separated from the two times by two hours, because the cement surface is slow to eat.
6, wipe the waterproof layer: the area of water penetration can be wiped three times, generally can be wiped twice.
7, site sample block method:
(1) Various raw materials for testing are accurately measured according to the mixing ratio.
(2) More use of bottomless test mode.
(4) The curing method is standard curing (conservation temperature is 20+-3°C, relative humidity is above 90%), and 24-hour demoulding maintenance period is 7 days or 28 days.
(5) 2-4 hours before the mortar compressive strength test, the test block can be subjected to the pressure test after being taken out from the standard environment.
The original sealed product is stored in a dry and cool environment. Under normal conditions of storage and transportation, the shelf life of the product is two years.